{"product_id":"labconco-4-protector-xstream-i-s-laboratory-hood-110416000","title":"Labconco 4' Protector XStream I-S Laboratory Hood - 110416000","description":"\u003ch5\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eLabconco 4' Protector XStream I-S Laboratory Hood\u003c\/strong\u003e\u003c\/span\u003e\u003c\/h5\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThe Protector XStream I-S Laboratory Hood takes containment, safety and energy savings to the extreme. With integrated sash position blower controls, this hood was designed for use with Intelli-Sense Multi-Speed Blowers. As the sash is raised or lowered, sensors alert the blower to change speeds to maintain a safe face velocity. That face velocity is displayed on the factory-installed Guardian Digital Airflow Monitor for users’ peace of mind.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eThis general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream I-S was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the mannequin. In all scenarios, the Protector XStream I-S allowed 0.00 ppm average level of tracer gas outside the fume hood. Although your safety officer will determine the actual face velocity setting for your laboratory, the ability of this hood to contain under these adverse conditions sets a new standard of safety.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eSafety is foremost, but energy savings is equally impressive. Although face velocity is a factor, it’s the volumetric rate (CFM) that determines the energy consumption. Operating a 6' Protector XStream I-S at 60 fpm face velocity, with the sash in its fully open position, requires only 690 CFM. Regardless of your desired operating face velocity, the Protector XStream I-S yields the lowest required CFM of any hood.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eBy-pass airflow design\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eEco-Foil Air Foil with aerodynamic Clean-Sweep airflow openings\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eCord-Keeper Slots on left and right side of air foil\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eUpper Dilution Air Supply\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eFactory-installed Intelli-Sense Blower control box\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eFactory-installed sash position activated blower speed switches\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eFactory-installed Guardian Digital Airflow Monitor\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eGlacier white powder-coated steel exterior\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eRear Downflow Dual Baffle System\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eChemical-resistant, fiberglass-reinforced, composite panel liner and baffles with flame spread index less than 25 per ASTM E84. Baffles are removable for cleaning\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eOpti-Zone Baffle with tapered slots\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eTempered safety glass vertical-rising sash\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003ePowder-coated sash handle with aerodynamic Clean-Sweep openings\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003e37.5\" (95.3 cm) high sightline from the work surface to the header panel\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eRemovable front and side panels, and front and interior service access panels for access to plumbing and electrical wiring\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003ePre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eSash stop located at 18\" (45.7 cm) sash opening position\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003ePowder-coated stainless steel, 12.81\" (32.5 cm) ID exhaust connection(s)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eFixtured Models May Feature:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eTwo pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for cold water. Components for converting either or both fixtures to air and vacuum are provided. Inlet tubing is not provided.\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eOne pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models only, one additional pre-wired GFCI electrical duplex receptacle on lower left side\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eRequired Accessories (Not Included)\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eIntelli-Sense Multi-Speed Remote Blower (without control box)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eDuctwork\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eWork Surface\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eBase Cabinet or Stand\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eDedicated Exhaust\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eOptional Accessories:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eService Fixture Kits (Some models include service fixtures)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eElectrical Duplex Kits (Some models include electrical duplex)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eDistillation Grid Kits\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eSash Stop Kits\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eCeiling Enclosure and Rear Finish Panel Kits\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eCompliance:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eCFR 29, Part 1910\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eExceed SEFA 1 definition when tested to ASHRAE 110\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eNFPA 45\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eASTM E84-09C\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eANSI Z9.5\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eUL 61010-1\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eCAN\/CSA C22.2 No. 61010-1\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eUL 1805\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eCE Conformity Marking (230 volt models)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eSEFA 8\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eADA (Contact Labconco for ADA-compliant models)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eEstimated Shipping Weight: 450.0 lbs\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eEstimated Shipping Weight metric: 204.1 kg\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eDimensions: 48.0\" w x 37.7\" d x 59.0\" h\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eDimensions metric: 121.9 x 95.8 x 149.9 cm\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eElectrical: 100-115V, 50\/60 Hz, 10A\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003e\u003cstrong\u003eAttributes:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eProduct Subcategory: General Chemistry\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eNominal Width: 4'\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eBlower Requirements: Remote blower required\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eConformance: ADA, ANSI Z9.5, ASHRAE 110, ASTM E84, CAN\/CSA C22.2, CFR 29, NFPA 45, SEFA 1, UL 1805, UL 61010\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eEnclosure Height: 59.0\"\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eExterior Depth: 37.7\" (95.8 cm)\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eLighting: LED\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eService Fixtures: 0\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"color: #000000;\"\u003eStyle: Benchtop\u003c\/span\u003e\u003c\/p\u003e","brand":"Labconco","offers":[{"title":"Default Title","offer_id":39547170357323,"sku":"110416000","price":0.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0246\/1030\/8171\/products\/xstream_1105100-_rgb_web_jan11_2019-2.jpg?v=1633947527","url":"https:\/\/serfinitymedical.com\/products\/labconco-4-protector-xstream-i-s-laboratory-hood-110416000","provider":"Serfinity Medical","version":"1.0","type":"link"}