Handicare Combi Standard (Attendant Operated, Not Include Footrests, Bucket, Hip Belt) - 201904314

Frame Assembly:

Remove the snaplocks and mount the backrest into the holes in the frame. Replace the snaplocks, ensuring they are inserted correctly into the steel tube with both pins correctly placed in the holes. It is possible, although not necessary, to detach the backrest when the Combi chair is used over a toilet.

Maintenance / Cleaning

To ensure the longevity of the chair and safety for the user, the following should be included in the daily inspection:

• Inspect and clean the castors of dust and dirt
• Inspect and clean the castors brakes of dust and dirt
• Check that all screws and nuts are properly tightened
• Check that the snaplock clips are securely fastened

After each use, or according to facility protocol, the Combi chair may be cleaned/disinfected with non-abrasive, non-corrosive solutions. The PUR seat and backrest can be detached for cleaning, as can the bucket/bedpan holder (NOTE: the rear section of the bucket/bedpan holder must be lifted upwards before removing the two rods from the holes). The entire Combi chair may also be washed/autoclaved at 85 degrees Celsius for 3 minutes. Avoid harsh solvents and chlorine. If alcohol is used to clean the black polyurethane, discoloration may occur. Ensure all parts are re-attached correctly prior to use.