Labconco 4' Protector Stainless Steel Perchloric Acid Laboratory Hood, 230V - 130400020

Labconco 4' Protector Stainless Steel Perchloric Acid Laboratory Hood

Protector Stainless Steel Perchloric Acid Laboratory Hoods are designed specifically for procedures involving the use of perchloric acid. They feature washdown systems, integral work surfaces and drainage troughs so that they may be thoroughly rinsed after each use to prevent the accumulation of potentially reactive perchloric salts.

These benchtop hoods feature a corrosion-resistant Type 316 stainless steel interior to withstand reaction from perchloric acid. The one-piece liner is free of joints, cracks or crevices to prevent build-up of residue and simplify decontamination procedures.

Features:

By-pass airflow design and by-pass block
Curved Eco-Foil air foil allows air to sweep the work surface while Clean-Sweep openings pull inflow air from under the air foil
Glacier white, powder-coated steel exterior
Cord-Keeper slots on left and right side of air foil
Seamless Type 316 stainless steel liner (23.5" interior depth) with radiused corners, integral work surface, drainage trough and pre-set baffle(s)
Black enamel-coated hardboard supporting surface
Tempered safety glass vertical-rising sash with cable and pulley
Removable front and side panels and front access panels for access to plumbing and electrical wiring
Pre-wired LED lighting with vapor-proof design and ADA-compliant light and blower switches. Lighting rated to 50,000 hours
Built-in washdown system with internal piping and spray nozzles with maximum flow rate from 0.5-1.0 GPM
Washdown fitting located on top of hood to facilitate onnection to external wash rings (wash rings not included)
11.0" OD Type 304 stainless steel exhaust connection(s)

Fixtured Models May Feature:

Two pre-plumbed service fixtures with forged brass valves, lower right side with brass tubing for gas and lower left side with copper tubing for air. Components for converting either or both fixtures to cold water and vacuum are provided. Inlet tubing is not provided.
One pre-wired GFCI electrical duplex receptacle on lower right side and, on 8' models, one additional pre-wired GFCI electrical duplex receptacle on the lower left side.

Required Accessories (Not Included)

Dedicated remote PVC blower
Wash rings and other ductwork
Base cabinet or stand

Optional Accessories:

Service Fixture Kits
Electrical Duplex Kits
Washdown Valve Kit
Guardian Airflow Monitor Kits
Sash Stop Kits
Ceiling Enclosure and Rear Finish Panel Kits

Compliance:

SEFA 1
NFPA 45
ASTM E84-09C
ASHRAE 110
ANSI Z9.5
SEFA 8
CFR 29, Part 1910
UL /61010-1
CAN/CSA C22.2 No. 61010.1
UL 1805

Specifications:

Estimated Shipping Weight: 565.0 lbs
Estimated Shipping Weight metric: 256.3 kg
Dimensions: 48.0" w x 31.7" d x 59.0" h
Dimensions metric: 121.9 x 80.5 x 149.9 cm
Electrical: 230 volts, 50/60 Hz

Attributes:

Product Subcategory: Perchloric Acid
Nominal Width: 4'
Blower Requirements: Remote blower required
Conformance: ANSI Z9.5, ASHRAE 110, ASTM E84, CAN/CSA C22.2, CE, CFR 29, NFPA 45, SEFA 1, SEFA 8 (Cabinet Surface Finish), UL
Enclosure Height: 59.0"
Lighting: T8 fluorescent
Style: Benchtop