Labconco Fume Adsorber-2 with Ammonia Carbon Filter - 3955402

Labconco Fume Adsorber-2 with Ammonia Carbon Filter 

Fume Adsorbers are geared for light duty histology cover slipping and staining areas. Activated carbon media adsorb organic odors and noxious vapors released by solvents like xylene and toluene while clean air is recirculated into the laboratory. These enclosures are low profile, completely portable and require no ductwork. They easily accommodate shallow countertops or those with overhanging cabinets.

Each Fume Adsorber includes either an activated carbon, formaldehyde or ammonia filter. Fume Adsorber-2 models contain two filters of the same variety.

Compliance:

UL 3101-1/61010-1 (115 volt models)
CAN/CSA C22.2 No. 1010.1 (115 volt models)
CE Conformity Marking (230 volt models)

Features:

Built-in, motorized impeller to provide face velocity up to 35 fpm (Fume Adsorber-2 models include two impellers)
Activated carbon, formaldehyde or ammonia filter (Fume Adsorber-2 models include two filters)
Glacier white, dry powder, epoxy-coated steel housing with perforated baffle for uniform airflow
Clear, one-piece, 3/8" thick, shatter-resistant acrylic canopy
Quiet operation at 58-63 dBA
Pre-wired with rear-mounted auxiliary electrical receptacle and top-mounted blower switch with circuit breaker
Rear-mounted air sampling port
Exterior dimensions: 15.4" h x 23.4" d
Interior dimensions: 13.5" h x 14.5" d

Options:

Available in 2.5' and 5' nominal widths

Required Accessories:

Replacement Carbon Filter

Specifications:

Estimated Shipping Weight: 150.0 lbs
Estimated Shipping Weight metric: 68.0 kg
Dimensions: 60" w x 23.4" d x 15.4" h
Dimensions metric: 152 x 59 x 39 cm
Electrical: 115 V, 60 Hz, 2 amps, Domestic

Attributes:

Conformance: CAN/CSA C22.2, UL
Exhaust volume: 35 fpm
Filters Available: Ammonia-Amine, Formaldehyde, Organic Vapor
Nominal Width: 5'
Outside ducting: Not applicable