Labconco WaterPro PS Polishing System/UF Life Science Model with Dispensing Gun - 9000741

Labconco WaterPro PS Polishing System/UF Life Science Model

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.

Features:

Timed dispense for unattended operation
Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time
Attractive and corrosion-resistant Type 304 stainless steel front panel
Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water.
Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point.
Built-in dispensing center
Quiet 1/4 hp motor and rotary vane recirculation pump
Dispensing valve
Wall mountable
TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models).
UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models).
ETL listed (115 volt models)
CE Conformity (230 volt models

Options:

Dispensing gun
International electrical configurations

Required Accessories:

Polishing Kit

Optional Accessories:

Activated Carbon Cartridge
Deionization Cartridge
Organic Adsorption Cartridge
Replacement Ultrafilter
Replacement UV Lamp
Hollow Fiber Final Filter
Filling Bell
WaterPro RO/PS Mobile Stand
Support Stand
Conversion Kits

Specifications:

Estimated Shipping Weight: 90.0 lbs
Estimated Shipping Weight metric: 40.8 kg
Dimensions: 31.1"w x 7.5"d x 30.1"h
Electrical: 230 volts, 50/60 Hz, 2.5 amps, North America

Attributes:

Water Purity Desired: Type I, TOC < 10 ppb, Pyrogen-free
Purification Method: Carbon Filtration, Deionization, Ultrafiltration, Ultraviolet Oxidation
Built In Options: Dispensing Gun
Flow Rate: 1.8 liters per minute
Conformance: CE, ETL
Feedwater Source: tap or pretreated
Power Cord & Plug: North America, 230 volts
Required Accessories: General Chemistry/UF Polishing Kit