Mettler TENS 212 Digital Two-Channel TENS Unit - ME-212
Questions? Speak with a specialist!
Chat with us!
Give us a call!
Email us!
Description
The TENS 212 Digital Two-Channel TENS Unit offers an affordable, portable unit that provides cycle burst modes. The timer may be set for 15, 30, 60 minutes, or continuous mode. The unit comes with a carrying case and the supplies necessary for therapy. The TENS 212 is a two-channel digital TENS device that provides continuous, modulated, and burst modes. Pulse frequency and width may be set independently. The large LCD display is easy to see from any angle and provides a visual of all your waveform parameters. Each unit comes with a carrying case, a set of four V-Trode™ self-adhesive electrodes, a 9-volt battery, and instructions.
- Affordable, portable offers continuous, modulated, cycle burst modes
- Pulse frequency, the width may be set independently
- Timer sets for 15, 30, 60 minutes or continuous mode
- Large LCD shows all treatment parameters while in use
- Compliance meter provides patient-use information in hours
Specifications
| Weight: | 5 oz. (140 grams), battery included |
| Dimensions: | 4.25″ (H) x 2.4″ (W) x 1″ (T), (108 mm (H) x 61.5 mm (W) x 25 mm (T) |
| Channels: | Dual, isolated between channels |
| Pulse intensity: | Adjustable 0-80 mA peak into 500 Ω load each channel, constant current |
| Pulse Rate: | 1Hz-160 Hz (adjustable), 1Hz/step (1-20 Hz), 5Hz / step (20-160 Hz) |
| Pulse Width: | 50 μs – 260 μs (adjustable), 10 μs/steps |
| Patient Compliance Meter: | Shows the treatment times in hours. |
| Timer: | 15, 30, 60 minutes, and continuous mode |
| LCD: | Shows modes, pulse rate (frequency), pulse width, timer, CH1/CH2 |
| Function Modes: |
B: Cycle Bursts, 2 Bursts/sec, 9 pulses / Burst, 100 Hz, width is adjustable. C: Continuous mode. Pulse rate, pulse width, and intensity are adjustable. M: Modulated Width. Pulse width is automatically varied in an interval of 6 seconds. The modulation range of pulse width is from setting the value to 35% less than the control setting value, then returns to the setting value. Rate, width, and intensity are fully adjustable. |
| Wave Form: | Asymmetrical Biphasic square pulse |
| Voltage: | 0-110 Volts (Open Circuit) |
| Max Charge per Pulse: | 21 micro-coulombs |
| Power Source: | 9-Volt Battery |
All electrical specifications are ±10% 500 Ω load
Each TENS 212 comes in a carrying case with a set of four electrodes, instructions, lead wires, and a battery.